| After-sales Service: | Support Online |
|---|---|
| Warranty: | Two Years |
| Max Diameter of Workpiece: | 1000mm |
| Mass Scope of Workpiece: | <900kg |
| Type: | Impact Testing Machine |
| Maxcapacity: | >1000KN |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Clamping plate specifications |
Clamped safety valve caliber | Bore of cylinder or oil cylinder | Clamping force (air pressure=6bar) |
| Medium clamping plate | Φ15-Φ200 | Oil cylinder bore: 80mm | 1.8T-13T |
| Large clamping plate | Φ50-Φ400 | Oil cylinder bore: 125mm | 9.8T-30T |
| DN PN P |
≤32 | 40 | 50 | 65 | 80 | 100 | 150 | 200 |
| 100KN | 32.0 | 32.0 | 32.0 | 25.0 | 20.0 | 12.0 | 5.5 | 3.0 |
| 80KN | 32.0 | 32.0 | 32.0 | 20.0 | 15.0 | 10.0 | 4.0 | 2.5 |
| 50KN | 32.0 | 32.0 | 20.0 | 15.0 | 10.0 | 6.0 | 2.7 | 1.5 |
| 35KN | 32.0 | 25.0 | 15.0 | 10.0 | 5.0 | 4.0 | 1.8 | 0.8 |
B-Large clamping plate Power source cylinder Calibration caliber:DN32-DN400 DN-mm PN-MPa
| DN PN P |
≤50 | 65 | 80 | 100 | 150 | 200 | 250 | 300 | 350 | 400 |
| 300KN | 45.0 | 45.0 | 32.0 | 32.0 | 15.0 | 8.0 | 5.5 | 4.0 | 3.0 | 2.0 |
| 250KN | 45.0 | 45.0 | 40.0 | 27.0 | 11.0 | 6.5 | 4.2 | 2.9 | 2.1 | 1.7 |
| 200KN | 45.0 | 45.0 | 32.0 | 22.0 | 9.0 | 5.5 | 3.5 | 2.5 | 1.8 | 1.5 |
| 150KN | 45.0 | 40.0 | 25.0 | 15.0 | 7.0 | 4.0 | 2.5 | 1.8 | 1.3 | 1.0 |
| 100KN | 45.0 | 25.0 | 15.0 | 10.0 | 4.5 | 2.5 | 1.5 | 1.0 | 0.8 | 0.6 |
| The main components | Detailed composition |
| Clamping system | Hydraulic tightening: consists of reversing valve, oil cylinder, pneumatic hydraulic system, check seat and movable clamp feet./Start the clamping device after the pin is in place, and reset the clamping device after the verification is completed |
| Test cabinet | The main cabinet is made of Q235 and sprayed |
| Test system | It is composed of high-pressure valve, high-precision pressure gauge, pressure reducing valve, booster system, etc. Equipped with precision pressure and pressure sensors ./The pneumatic dual body and solenoid valve are made by Airtac from Taiwan, the pressure sensor is made by IFM in Germany, and the booster pump is made by ODMT. The sealing parts of the booster pump are all imported from the United Kingdom. , Micro lift, metric, inch, threaded and domestic and imported safety valves |
| Measuring system | Using the most advanced programming software and data acquisition system, Lenovo business computer./Computer real-time display of the test process, LABBIEW programming software, NI acquisition card |
| Control | Computer control |
| Related accessories | Center pad or inch diameter outer joint: 1 sets are specified by the customer. "O" type seal: There are 30 specifications in total. |
| Machine Name | Computer Control Safety Valve Test Bench |
| Model | MAQ-300/25BA-C |
| Tested object | Safety valve |
| Features | Safety valve take-off pressure seal test |
| Test medium | Air(N2) |
| Maximum test pressure | 250 bar |
| Maximum proof path | 300mm/DN15-DN300(1"-12") |
| Calibration accuracy | ±0.4% |
| Medium temperature | Room temperature +10-80ºC |
| Ambient temperature | Room temperature |
| Simultaneous test pieces | 1 piece |
| Wooden Cases | Export standard fumigation wooden cases |
Application Fields:
Used for testing all kinds of safety valve, such as spring directly load safety valve, Power assisted safety valve, Supplementary loaded safety valve, fully open, slightly open, flange, thread type safety valve. Safety valve test bench is to use high pressure air or nitrogen as the medium to test the sealing performance of the safety valve, jump pressure, back seat pressure, etc., for a variety of safety valve set pressure adjustment, set pressure test, discharge pressure test, back seat pressure test, test the pressure sealing performance of the safety valve, leakage rate. Safety Relief Valve Test bench has obvious advantages in techniques, test accuracy, safety etc.
The safety valve checkout platform is a device that simulates the working environment of the safety valve offline and makes the internal pressure rise to the safety valve lift.
At the same time, the pressure gauge on the device can show the starting pressure of the safety valve.
The test pressure can be checked to check the starting pressure (also called opening pressure, setting pressure) of the safety valve. Suitable for performance testing of fixed pressure, backseat pressure and tightness of direct loading and pilot safety valves.
Q1. Where is your factory located ? How can I visit there?
Our factory is located in Jinan city, Shang dong Province, China. We can go to Jinan airport and wait for your arrival.
Q2 : Do you have stock for all items?
A:In general, we have some stock, while if you need a bulk order, we still need time to produce it. Of course, we will inform all details you before your payment.
Q3. How long can be finished the goods ?
A : Sample order : within one week ;
Large order : 15-25 days ; According to your purchase quantity.
Q4. At which port do you usually ship the good?
We usually ship goods via Qingdao port of China.
Q5 : What is payment terms ?
A: Sample order : 100% full payment before start to production;
Large order : 30% deposit first, 70% pay after see the BL copy ;
Q6: Can give free sample ?
A : Free : if small spare parts and the cost not too much is ok ;
Not Free : the cost expensive and all the machine can not be free ;
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}