| Customization: | Available |
|---|---|
| After-sales Service: | Support Online |
| Warranty: | Two Years |
|
Still deciding? Get samples of US$ 1000/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
M series pneumatic 32-1360 Bar Output Mini air Pneumatic liquid CO2 transfer pump for filling Liquid CO2 cylinder
M-Series air driven liquid pump uses a built-in pneumatic control four-way two-position valve to move to and fro automatically. This series of product is produced by introducing related technology abroad and designing according to the standards of our country. The air driven parts are all made of aluminum alloy and are treated with oxidation. The pump head is made of carbon steel or stainless steel according to different media.
M series pumps
Single acting, single air drive head
Diameter of drive plunger is 80mm
The diameter of the drive piston of this series is up to 80mm, air pressure≤8bar. This kind of pumps has the following characteristics:
Light weight, portable design
Large flow, wide pressure range
Apt to control, both manual and automatic controls are available.
Appropriate for most fluid
No electricity is needed.
Easy to maintain
| Type | Pressure ratio | Outlet pressure | Flow | Connections | Inlet | Outlet | Net weight KG | |
| bar | psi | L/Min | Drive ports | |||||
| M4 | 4:1 | 32 | 464 | 14.81 | G3/8 | G1 | ZG 1/2 | 4.8 |
| M10 | 10:1 | 80 | 1160 | 7.07 | G3/8 | ZG 3/4 | ZG 1/2 | 4.3 |
| M16 | 16:1 | 128 | 1856 | 4.55 | G3/8 | ZG 1/2 | ZG 1/2 | 4.2 |
| M30 | 30:1 | 240 | 3480 | 2.22 | G3/8 | ZG 1/2 | ZG 3/8 | 4.2 |
| M44 | 44:1 | 352 | 5104 | 1.36 | G3/8 | ZG 3/8 | ZG 3/8 | 4.1 |
| M64 | 64:1 | 512 | 7424 | 0.72 | G3/8 | ZG 3/8 | ZG 3/8 | 4.1 |
| M100 | 100:1 | 800 | 11600 | 0.48 | G3/8 | ZG 3/8 | M14X1.5 | 4.1 |
| M170 | 170:1 | 1360 | 19720 | 0.28 | G3/8 | ZG 3/8 | M14X1.5 | 4.1 |
*Pressure ratio is driven surface/driving surface.
*Static outlet pressure (calculated and maximum allowed) at an air drive pressure of 8 bar (116 psi).
*The minimum air drive pressure to start the pump is 3bar (43.5 psi). Depending on the pressure ratio a special outlet pressure can be reached.
M-Series air driven liquid pump uses a built-in pneumatic control four-way two-position valve to move to and froautomatically, This series of product is produced by introducing related technology abroad and desianing accordingto the standards of our country. The air driven parts are all made of aluminum alloy and are treated with oxidation.The pump head is made of carbon steel or stainless steel according to different media.
The diameter of the drive piston of this series is up to 80mm, air pressure≤8bar.
ODMT products are driven by compressed air and have the following characteristics:
1. The pressure can be adjusted through manual pressure control valve or air control valve;
2. Driven by air, especially used in explosion-proof applications;
3. Able to reach the preset final pressure;
4. Automatic pressure compensation by the pump;
5. Reliable operation, low maintenance cost and low noise during operation.
6. Maintain pressure for a long time without consuming energy;
7. The medium will not overheat when maintaining pressure;
8. Easy to install and low maintenance cost. Just connect the gas source, inlet pipeline and pressure pipeline to work
ODMT gas-liquid booster pump can boost oil, water and chemical media with a pressure of 600MPa and is driven by 0.1-0.8MPa air or inert gas. It has compact structure and low cost. It can be widely used in fields such as machine tools, oil and gas, chemistry and petrochemical industry, national defense, mining, coal mining machinery, engineering machinery and aerospace.
Instructions for use of ODMT air drive liquid pump:
Installation location
In principle, the ODMT liquid pump can be installed in any position, but to ensure the longest service life of the seal, vertical installation is recommended.
Drive air connection and start-up
The drive air connection is located outside the pump's air-operated directional valve. In any case, a compressed air filter and a water separator need to be installed. An optional air control unit is a triplet: including filter with water separator, pressure reducing valve, pressure gauge, air lubricator (i.e. oil fogger).
Recommended hydraulic oil
The correct use of the liquid pump and the efficiency of the liquid pump mainly depend on the quality grade used. The recommended viscosity range of hydraulic oil is 46#.
Note: When operating continuously with moisture or high-humidity gas, icing will occur. In this case, it is recommended to install a water separator or dryer on the drive pipeline, coupled with an oil mist device. Choosing high-quality driving gas can extend the service life of liquid pump seals.
Interface size matters
Please confirm that the installed joints and pipes are within the pressure range of the pump. In order to ensure that the liquid pump obtains ideal flow and pressure, the interface size of the pump cannot be reduced.
ODMT liquid pump operating temperature
Standard temperature range is -20ºC to +60ºC. (When the temperature is below 0ºC, make sure the driving air source is dry and clean).
Recommended driving air quality According to PNEUROP (European Supercharger, Pneumatic Pump and Gas Driven Workpiece Manufacturers' Committee) recommendation code 611/1984, driving gas is divided into 3-4 quality levels.
1. Particles: Maximum particle size 54; Maximum particle concentration 5mg/m3; 2. Dew point: +10ºC=moisture content 9.4g/m3+2ºC=moisture content 5.6g/m3;
3. Oil content: 1.0-5mg/m3.
Q1. Where is your factory located ? How can I visit there?
){kind=link}